Quick Answer: What Is a Chinese Timber Column Grid?
A Chinese timber column grid is the layout of posts across the width and depth of a framed building. A bay (间, jiān) is the interval between adjacent columns or column axes. Architects use the intervals to describe the size and layout of a hall.[1]
- Width: Count the intervals along the front elevation.[1]
- Depth: Count the intervals from front to back on a plan.[1][3]
- Spacing: A hall can have a wider central bay than its side bays.[1]
Read the posts and the spaces between them first. Doors and partitions help you understand how the spaces were used.[1]

When reading traditional Chinese architecture, a façade and a floor plan tell you different things about the same frame. The façade shows the rhythm of the supports. The plan lets you see which lines of support continue behind it.[1][3]
What a Bay Measures
Four posts in a straight row make three intervals. In a hall with a symmetrical front, that gives a central bay flanked by two side bays. The central interval is often broader, but it depends on the building. In a drawing, measure between the centerlines of adjacent supports to see where bay widths vary.[1]
The bay is also a useful spatial unit. A door might fill the central bay, with windows or panels to either side. In a hall, several bays can open onto one another and form a single interior. A partition between two columns shows where the interior was divided. When a later partition interrupts a bay, compare the wall with the column lines before treating it as part of the original frame.[1]
How the Grid Supports a Timber Roof
In a raised-beam frame (抬梁, táiliáng), the columns carry horizontal beams. Shorter posts or struts can support members higher up. The roof timbers pass weight down through the beams to the columns. In some formal buildings, bracket sets between the columns and the roof structure also support projecting members near the eaves.[1][4]
In a column-and-tie frame (穿斗, chuāndǒu), tie beams connect rows of columns, which support purlins. This produces a different distribution of vertical supports. The bays on a plan show the spacing of posts. A section lets you see how each post connects to the timbers above it.[1][4]
Reading the Grid at Foguang Temple
The East Hall at Foguang Temple on Mount Wutai, Shanxi, dates to 857 CE. Its plan measures seven bays across the front and four in depth. UNESCO identifies it as a major surviving Tang timber hall. The supports behind the broad front help carry the roof and organize the interior, which UNESCO records as housing life-size clay sculptures.[2][3]
If you are looking at a photograph taken from the front, follow the visible column rhythm first. A measured plan will show the depth. Compare the interior supports with the outer column lines. Foguang Temple’s separate Manjushri Hall, built in 1137, also has seven bays across the front and four in depth, but has only two interior columns.[1][3]
FAQs About Chinese Timber Column Grids
Are Chinese timber bays all the same width?
Many halls have a wider center bay. Check the spacing in the individual building.[1]
Does seven bays mean seven rooms?
Seven bays describes seven intervals across the building. Several intervals can open into a single hall.[1][3]
Can you identify a frame type just by counting columns?
The count describes the plan or façade. Look at a section to see the relationship between columns, beams, ties and purlins.[1][4]
Источники
[1] Princeton University Press. The Chinese Building Standards
[2] UNESCO World Heritage Centre. Mount Wutai nomination and conservation documentation
[3] Changchun Institute of Technology. The Eastern Great Hall of Foguang Temple
[4] Journal of Asian Architecture and Building Engineering. Tectonic Traditions in Ancient Chinese Architecture, and Their Development
